Medium Voltage Cable Sizing
Enter the system parameters to calculate the appropriate cable size for your medium voltage application.
Cable Sizing Results
Recommended Size
-- mm²
Current Capacity
-- A
Voltage Drop
-- %
Cable Specifications:
Type: --
Insulation: --
Sheath: --
Conductor: --
Notes:
- Results are based on IEC 60502 standards
- Consider derating factors for grouping and depth of burial
- Verify short circuit withstand capacity
- Consult manufacturer data for exact specifications
Power Loss Analysis
Key Observations:
- Power losses increase quadratically with current (P = I²R)
- Higher voltage systems show lower percentage power losses
- Larger cable sizes reduce losses but increase initial cost
- Buried cables typically have better cooling than tray installations
Cable Sizing Guidelines
Current Carrying Capacity
The cable must be able to carry the maximum load current without exceeding temperature limits.
Voltage Drop
Ensure voltage drop is within acceptable limits (typically 3-5% for distribution systems).
Short Circuit Withstand
Cable must withstand short circuit currents for the duration of protection operation.
Measurement Transformer Sizing
Calculate the appropriate current and voltage transformer specifications for your protection and metering needs.
Transformer Sizing Results
Ratio
--
Accuracy Class
--
Burden
-- VA
Specifications:
Type: --
Application: --
Primary: --
Secondary: --
Recommendations:
- Verify short-time current rating matches system fault levels
- Consider using dual-core CTs for metering and protection
- Ensure burden doesn't exceed transformer rating
- Check compliance with IEC 60044 standards
Transformer Selection Guidelines
Current Transformers (CTs)
Select CTs based on primary current, accuracy class, burden, and application (metering or protection).
Voltage Transformers (VTs)
Choose VTs based on system voltage, accuracy requirements, and burden of connected instruments.
Safety Considerations
Never open-circuit a CT secondary circuit or short-circuit a VT secondary circuit.